If you're able to hit where you aim at 1-200 yards, be happy. Both were Colt, for whatever that's worth. ![]() I've bought two mil-spec handles out of the EE. Both have 600 meter elevation adjustments as opposed to the A2's 800 meter elevation adjustments. Take it outside to the likely ranges you're going to use it for and see what increased range does to the polynomial equation. The carry handles for the A4 and M4 rifles are the same. The bottom line is, if you have an F Heigth FSB and want to use a carry handle, then you need a Mil-Spec Handle. 040' shorter than what it is on a Colt® or a TRUE Mil-Spec Handle. That's what windage correction is for…to adjust for myriad differences in the weapon/ammo/ambient conditions possibilities. the shelf that the sight assembly sits on is. The actual grouping (once adjusted) looks pretty decent, and if you're happy with that and STILL have adequate windage correction available in both directions for any reasonable conditions/distances (and it appears you do…), I'd not worry too much about it. ![]() Does the front sight appear to also be "centered and vertically plumb" (I assume it's a fixed post)? Have you tried different types/brands of ammo? Just too many variables to worry about the rear sight alone being the problem at this point, IMHO. Does the unit mount "plumb" to the barrel centerline, or does tightening the knurled mounting knobs skew it to one side? If the latter, some very thin shims on the opposite side might help, if you absolutely MUST have it shoot to mechanical center (why, I dunno).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |